Click on the image to check the artwork
WD35 receives and processes radio signal which comes from the wireless switch to control various lighting equipments. Its integration with microprocessor, wireless transceivers relay makes it strong anti jamming ability. Wireless switch, wireless sensor and intelligent host are available to mate with WD35.
1.Lighting controller and wireless switch should be ready and keep a distance within 30 meters.
Select one random button (I/O) on the wireless switch to control the light.
2.When the lighting controller is in an energized state, pressing selected button twice quickly within
3 seconds. (pressing button time interval should not exceed 500 millisecond)
Recording light twice means code matching successfully.
3.For more wireless switches code matching with this lighting controller, repeat the above steps.
→ normal mode (normal operation, after 3.5 seconds)